目前電動卷簾門在市面上得到了廣泛的應用，電動卷閘門是以多關節活動的門片串聯，由電動機組帶動，在固定的滑道內，以門上方卷軸為轉動上下的門。它通過遙控器的控制來實現窗簾的上升、停止、下降動作。在使用電動卷簾門是常見問題是電機頻繁使用，導致電機發熱停止，這個問題是什么原因?qū)е碌哪兀?a href="http://m.0769lspacking.com">濟南卷簾門廠家為您解答。

At present, the electric roller shutter door has been widely used in the market. The electric roller shutter is a door that is connected in series with multi joint movable doors, driven by the motor unit, and rotates up and down in the fixed slide way with the roller above the door as the center. The curtain can be raised, stopped and lowered through the control of the remote controller. When using the electric roller shutter door, the common problem is that the motor is frequently used, which causes the motor to stop heating. What causes this problem? Jinan roller shutter door manufacturer answers for you.

在電動卷簾門使用在電機過熱是常見問題，如果長時間出現電機過熱會導致電機壽命降低，嚴重情況是直接燒壞電機，導致電機報廢。出現過熱問題一般是卷簾門頻繁關閉或者卷閘門卷過頭，再或者是卷閘門使用時間久在上升、下降的過程中卡機，運行不順暢等，這些問題都會導致電機過熱。而廠家為了解決電機過熱就要想辦法解決這一問題。

Motor overheating is a common problem in the use of electric roller shutter doors. If motor overheating occurs for a long time, motor life will be reduced. In serious cases, the motor will be directly burned, resulting in motor scrap. The overheating problem usually occurs when the roller shutter is closed frequently or the roller shutter is rolled over, or when the roller shutter is used for a long time, the machine jams in the process of rising and falling, and the operation is not smooth. These problems will lead to motor overheating. In order to solve the motor overheating, the manufacturer must find a way to solve this problem.

通常解決電動卷簾門過熱問題，只要在電機中安裝溫控開關便可以了，這是簡單方便的一種方法。熱保護器作用是非常強大的，在長時間連續運轉導致電機過熱時，這個熱會傳導到溫控開關，溫控開關接收到溫度后，會自動斷開，使電機停止運行。

Usually, it is a simple and convenient method to solve the overheating problem of electric roller shutter door by installing a temperature control switch in the motor. The thermal protector is very powerful. When the motor is overheated due to long-time continuous operation, the heat will be transmitted to the temperature control switch, which will automatically disconnect after receiving the temperature to stop the motor.

就是電機中自帶的過熱保護裝置-溫控開關發生了保護作用，所以當遇到電動卷簾門電機頻繁使用發熱停止運行時，不要擔心，可能是溫控開關在進行保護。此種情況下，請停止一切操作，待電機溫度降低到范圍后，即可恢復正常工作。

It means that the temperature control switch, the built-in overheat protection device in the motor, has a protective effect. So when the motor of the electric roller shutter stops running due to frequent use of heat, don't worry. It may be the temperature control switch that is protecting. In this case, please stop all operations and resume normal operation after the motor temperature is reduced to a safe range.

電動卷簾門電機頻繁使用發熱停止是什么原因？這就是很多人問到的問題，以上就是小編給您的解答，您可以作為參考信息多看看，更多注意事項可以來我們網站http://m.0769lspacking.com咨詢了解。

What is the reason why the electric roller shutter motor is frequently used to stop heating? This is the question that many people ask, and the above is the answer given to you by the editor. You can take a look at it as reference information and visit our website for more precautions http://m.0769lspacking.com Ask about it.