Nowadays, the application range of rolling shutter door is more and more extensive, whether it is the enterprise or the personal garage is widely used, and the safety measures such as fire prevention and anti-theft are also very perfect. Do you know what points need to be understood when measuring the door? Next, Jinan roller shutter door manufacturers will be in the following for you to introduce, hope to help you.

1、地板

1. Floor

由于客戶的實際情況千差萬別，大體歸為三種：一種是已經鋪好地板的，用上述測量方法測量即可；第二種是未鋪地板的，高度應減尺寸。

As the actual situation of customers varies greatly, it can be divided into three categories: one is that the floor has been paved, which can be measured by the above measurement method; the second is that the floor is not paved, and the height should be reduced.

A、地板磚：大理石、瓷磚統一減少50mm；B、平鋪木地板、復合地板、實木地板統一減少30mm；C、打骨架木地板以骨架跟實際地板厚度增加10mm為準。

A. Floor tile: marble and ceramic tile should be reduced by 50mm; B. flat wood floor, composite floor and solid wood floor should be reduced by 30mm; C. the thickness of skeleton wood floor should be increased by 10mm.

2、單直角墻

2. Single right angle wall

測量者應該主動征求客戶意見，結果：一是客戶選擇左右保留線條，統一美觀，測量者與客戶注明目標尺寸減小60mm，才可以實現保留線條的愿望。

The surveyor should take the initiative to solicit customers' opinions. The results are as follows: first, the customer chooses to keep the left and right lines in a unified and beautiful way. The surveyor and the customer indicate that the target size is reduced by 60mm, so that the desire of retaining the line can be realized.

第二是客戶選擇目標尺寸不變(客戶要求門扇稍大一點)，須與向客戶講明，卷簾門廠家表示靠直角墻框邊線條安裝割小合適為止(效果是線條左右不對稱)。

Second, the customer chooses the target size to remain unchanged (the customer requires the door leaf to be a little larger), and it must be explained to the customer that the rolling shutter door manufacturer said that the installation of the edge line of the right angle wall frame should be cut down until it is appropriate (the effect is that the line is asymmetric to the left and right).

車庫門

Garage door

3、雙面直角墻

3. Double sided right angle wall

測量者應該主動征求濟南卷簾門客戶意見，結果：一是客戶選擇左右保留線條，統一美觀，測量者可以采取減小目標尺寸120mm，即可以實現上述目標；第二是客戶選擇目標尺寸不變，安裝時安裝工人把靠雙面直角墻的線條割小合適為止。

The surveyor should take the initiative to solicit opinions from customers of Jinan roller shutter door. The results are as follows: first, the customer chooses to keep the line on the left and right, which is unified and beautiful. The surveyor can reduce the target size by 120mm, that is, the above goal can be achieved; second, the customer chooses the target size unchanged, and the installation workers cut the line close to the double-sided right angle wall until it is appropriate.

4、頂墻直角

4. Right angle of top wall

測量者應該主動征求濟南卷簾門客戶意見，一是客戶選擇保留線條，統一美觀，測量者可以采取減小(矮)目標尺寸60mm，即可以實現上述目標；第二是客戶選擇目標尺寸不變，安裝時安裝工人把線條割小合適為止。

The surveyor should take the initiative to solicit opinions from customers of Jinan roller shutter door. First, the customer chooses to keep the line, which is unified and beautiful. The surveyor can reduce the (short) target size by 60mm, which can achieve the above goal; the second is that the customer chooses the target size unchanged, and the installation workers cut the line to be appropriate during installation.

左右墻及頂墻的墻面垂直度及傾斜度。測量者應該注意選擇zui小點作為目標尺寸。

Verticality and inclination of left and right walls and top walls. The measurer should pay attention to choose Zui dots as the target size.

綜上所述，測量卷簾門時需要注意的五點內容到此就講解完了，相信大家閱讀完這些內容之后對其有了進一步的了解，希望能幫到大家，另外，濟南卷簾門廠家建議大家要定期對其進行維護保養，盡量延長其使用壽命。

To sum up, the five points that should be paid attention to when measuring the rolling shutter door are explained here. I believe that after reading these contents, we have a further understanding of it, hoping to help you. In addition, Jinan rolling shutter door manufacturers suggest that we should regularly maintain it to extend its service life.